Cable Path Gaffer Tape 4" / 100mm x 30yds/ 27m Black
A premium vinyl coated cloth tape that is coated on both edges with a premium cured rubber adhesive system. The center portion has a smooth surface for pulling cable and wire through. The high performance adhesive will hold firmly for extended periods of time on most surfaces and remove without residue.
The center portion has a smooth surface for pulling cable and wire through.
Yellow, Black, Yellow Printed Black, Yellow Safety Stripes
Smooth center allows for repositioning cable, high adhesion mass with gaffer adhesive removes cleanly, hand tearable, matte gaffer backing for low reflectivity of light
Safety, Temporary Holding, Wire/cable hold down
Printable, Good Adhesion, Clean Removal, Repositionable , Outdoor Use, Highly Conformable, Hand Tearable, Good Abrasion Resistance, Weather Resistant
Backing: Premium Cotton Weave
Adhesive: Synthetic rubber based
Total Thickness: 11 mils
Temperature Range: 50°F to 200°F
Tensile Strength: 45 lbs per inch
Adhesion to steel: 80 oz per inch
Made in the USA
Other Colours and Sizes available - see our other listing
Kenderdine Electrical ltd/ Professional Lighting Services ltd is open M - F 8.30 -5 in the Auckland CBD for inspection.
GST receipts available